The ‘Cleaner Tiger’ is suitable for dry cleaning and chopping of beets.
- Suitable for cleaning and chopping beets
- Stationary setup on 4 height-adjustable legs
- Fully hydraulically driven: one double-acting valve with leakage oil line from tractor, telescopic handler or wheel loader required
- Chopping roller
- Chopping roller 600mm
- Spring loaded stone valves
- Coarseness adjustable
- Funnel 3m³
- Raises on side and back
- Safety cord around the machine
The Cleaner Tiger is available in 4 different modules, which can optionally be equipped with additional options of your choice. The modules are designed and configured to suit specific applications and purposes.
Standard model dimensionsWithout optional equipment | |
Recommended oil flow rate | Min. 40l/min. |
A x B x C (transport) | 2.04m x 2.60m x 4.80m |
Height adjustment (D) | 0,71m |
Bunker length (E) | 3,08m |
Cleaning roller length | 2,89m |
Chopping roller width | 0,60m |
Height increments | 0.36m |
Hopper contents | 3m³ |

——————————————————————————————————————————————————————————————–
| Module 1: Cleaner Tiger M Basic model with the most commonly used options. Ideal for stationary use on a farm. |
Included equipment with Module 1:
- Hydraulic unit (11kW – 21A – 40l/min.), without oil cooler (3 x 380 V + N, 32 A plug required)
- Hydraulic stone protection: swing-away chopping roller
Optional equipment for Module 1:
- Hopper (+600mm, 4m³ additional capacity)
- Hopper extensions (360mm height)
- Extra fine cutting (up to approx. 50% finer than standard)
- Comb brush, for enhanced cleaning
- 5 m discharge conveyor, directed to the rear, left or right. Height adjustable with manual winch. Includes 15 kW hydraulic unit
- Oil cooler (recommended for continuous operation exceeding 45 minutes)
- Galvanized version
——————————————————————————————————————————————————————————————–
| Module 2: Cleaner Tiger XL Basic model for increased capacity, equipped with the most commonly used options. Particularly suitable for biogas installations requiring higher throughput, or for end users who also wish to clean beets without cutting them. This is made possible by the swivelling cutting unit. |
Included equipment with Module 2:
- Hydraulic unit (15kW), 1 large and 1 small pump
- Hopper (+600mm, 4m³ additional capacity)
- Swivelling cutting unit with an 800 mm cutting roller, capacity: 40 tonnes/hour. This allows the machine to be used for cleaning only, if required.
- Hydraulic stone protection: swing-away chopping roller
- Oil cooler (recommended for continuous operation exceeding 45 minutes)
Optional equipment for Module 2:
- Extra fine cutting (up to approx. 50% finer than standard)
- Comb brush, for enhanced cleaning
- 5 m discharge conveyor, directed to the rear, left or right. Height adjustable with manual winch.
- Galvanized version
——————————————————————————————————————————————————————————————–
| Module 3: Cleaner Tiger Automatic M Basic model with the ability to separate out stones. This machine is particularly suitable for automatic feeding systems, and the option to receive a control signal from such a system is provided as standard. |
Included equipment with Module 3:
- Automated stone separation system with a 5 m discharge conveyor, oriented to the rear, left, or right. Height adjustable using a manual winch. Includes an 11 kW hydraulic unit (21A, hydraulic pump (40 l/min)). 3 x 380 V, 32 A plug required
Optional equipment for Module 3:
- Hopper (+600mm, 4m³ additional capacity)
- Hopper extensions (360mm height)
- Extra fine cutting (up to approx. 50% finer than standard)
- Comb brush, for enhanced cleaning
- Oil cooler (recommended for continuous operation exceeding 45 minutes)
- Galvanized version
——————————————————————————————————————————————————————————————–
| Module 4: Cleaner Tiger Automatic XL Basic model with automation for stone separation. This installation is particularly suitable for biogas plants where it is essential that no stones remain among the cut beets. Thanks to the swivelling cutting housing, the machine offers a higher capacity. It can also be used for cleaning only, without operating the cutting unit. When used solely for cleaning, the stone separation system is inactive, as it only functions in combination with the cutting unit. The stone separation process operates via the counter knife of the cutting unit. |
Included equipment with Module 4:
- Hopper (+600mm, 4m³ additional capacity)
- Swivelling cutting unit with an 800 mm cutting roller, capacity: 40 tonnes/hour. This allows the machine to be used for cleaning only, if required.
- Automated stone separation system with a 5 m discharge conveyor, oriented to the rear, left, or right. Height adjustable using a manual winch. Includes an 15kW hydraulic unit (hydraulic pump (40 l/min)). 3 x 380 V, 63A plug required
Optional equipment for Module 4:
- Extra fine cutting (up to approx. 50% finer than standard)
- Comb brush, for enhanced cleaning
- Galvanized version
Request your product brochure for the stationary beet cleaner chopping “CLEANER TIGER” here and we’ll get it to you as soon as possible
Request your free quote here and we’ll get you all the information as soon as possible.



